Login with your Employee ID
Once you are logged in you will notice there is a Job ID: and Quantity field. This app correlates with the Cognex Scanner and lets you manually key in a Job ID as needed. Any barcode traveling under the Cognex scanner area should be automatically scanned and loaded.
Notes:
Find the Turbine Printing App Config file in your D Drive, here we can add the Machine Token and setting up Caldera to Pre-Rip.
You will need to add the “ripServerUri” and “ripServerHotfolderPath” if you are doing “on-demand” ripping. If you are doing Pre-Ripping, this will be unnecessary.
Since the Cognex scanner is a network attached device it is highly important to specify the ip address “scannerIpAddress” and the port “scannerPort”
“printerHotFolderPath” is the path to put the print files in, we recommend putting it on the D Drive.
“tempHotfolderPath” It is for temp art if you were not using Pre-Rip it will download to the temp folder first then move it when it is done.
“devMode” allows you test jobs that already have been printed or cancelled etc. Usually for debugging.