A Print Recipe is the combination of Print Profile and Print Preset to be assigned to SKUs to ensure each print is RIP’d and printed accurately. A list of Print Recipes in Turbine can be found by navigation to Admin > Print Settings > Print Recipes:
To add a new Print Recipe, click on the Add New Print Recipe button in the top right corner of the Print Recipes page and you will be presented with a form to create a new recipe:
Set the location to your default print warehouse, name the recipe something to identify the recipe for assignment to SKUs. The name should include a descriptor of the garment color and fabric content. The Print Profile is the profile from the RIP, and the Print Preset corresponds to the preset for drying and curing the garment on the printer.
The Foundation x speed ratio is a decimal point calculation of speed for the spray system prior to printing. A value of 1.0 would be 100% speed, while 0.1 would be 10% speed resulting in a longer and higher volume of spray. 3.0 would be the highest value at 300% speed resulting in the least amount of spray.
Once complete, click the Create button to save the print recipe that can now be assigned to SKUs using the Inventory > Skus > Bulk Update interface.