Once a Print Recipe or Print Pallet have been added to the Admin > Print Settings page, you must assign them to SKUs in bulk using the Inventory > Skus > Bulk Update page. Note this page is under the Inventory section but requires Admin privileges to make changes:
To assign a setting start by selecting a supplier identifier or style from the drop-down menu. Once selected, check the boxes next to the color and size options of that SKU for which to update:
Once all colors and sizes have been selected, scroll down to the V3 Print Recipe to attach a v3 ink recipe to a SKU:
Other print options to bulk update are Print Pallet and OvalJet Double Spray. The Print Pallet controls the max printable area of a print along with the spray mode used on the OvalJet. If a garment requires additional spray for curing setup, check the box and two spray nozzles will be activated for that garment.
Once all options to update have been selected, scroll down to the bottom to save changes. All the options on the page will be reset and new SKUs can be selected: